What Is Pole Saw?
A pole saw is an electric or gasoline-powered tool used to cut low-hanging branches and limbs from trees as well as shrubs.
The blades rotate as the user pulls a rope or pushes a button, allowing them to provide enough force to cut through thick vegetation without requiring too much strength from the person operating it.
They come in a variety of sizes, but they are most commonly being used by homeowners with larger yards.
The average pole saw has an 11-meter reach, making it easy for the user to reach limbs over 10 feet above ground without having to climb a ladder or use complicated rigging.
Pros And Cons Of Pole Saw
Pole saws are an easy and safe alternative to traditional chainsaws, which makes them very attractive for pruning low-hanging branches.
They’re also ideal for people who don’t feel comfortable handling a large chainsaw or are not experienced enough to use it with no assistance.
Pole saws can cut through tree limbs up to two inches in diameter, whereas pole clippers struggle with anything thicker than half an inch.
The telescopic shaft of a pole saw allows users to adjust the length of the handle accordingly, which provides additional safety by allowing them to stand or kneel on the soft ground instead of balancing precariously on ladders.
Pole saws are also lightweight, which makes them easy to control and prevents back injuries that can result from using a chainsaw for an extended period.
Like most power tools, pole pruners need regular maintenance to operate properly.
The blades must be kept sharp for the pole saw to cut through tree limbs quickly and efficiently.
The telescopic shaft must also be kept clean and oiled periodically for it to extend and collapse smoothly.
Because of these factors, pole saws can be significantly more expensive than pole clippers, which only require replacement blades and occasional tightening of screws.
What Is Pole Pruner?
Pole pruners are small scissor-like clamps that are placed around a tree branch.
The blades shut like scissors and cut the branch off at the desired length.
It works by trapping the limb between two sharp metal blades, which apply pressure to clamp down on it until it’s severed.
They can be especially useful for difficult-to-reach branches that would normally require scaffolding, a large ladder, or an aerial lift.
Pros And Cons Of Pole Pruner.
Pole clippers work best on smaller branches and limbs.
They can also be used to prune plants without having to remove them from their pots first, which is ideal if they’re already planted in the ground and you don’t want to damage the roots by digging them up.
Pole clippers are less likely than pole saws to kick back as well as they don’t require as much strength as a chainsaw.
The blades of pole clippers are also thinner and less likely to become dull, which means it requires less effort to use them.
Pole clippers do not have the same power behind them as a handheld chainsaw or pole saw.
They also only have a shorter reach compared to a pole saw, which means they can only cut off branches up to three feet from the trunk of the tree.
The blades of a pole clipper are usually smaller as well, so they’re more likely to become dull or broken if used on anything thicker than half an inch.
You also have to maintain the blade of a pole clippers just like you would with a chainsaw, which is something that most homeowners don’t have experience in.
Pole Saw vs Pole Pruner
The primary difference between a pole saw and a pole pruner is that a pole saw cuts off branches from the tree trunk, while a pole clipper only cuts off individual limbs.
Pole saws are larger because they contain heavier-duty blades designed to cut through larger branches at one time, whereas a pole clippers blade is not as wide.
Pole saws are also equipped with an extending telescopic shaft, which allows the user to cut branches from different angles easier than regular pruning shears.
Pole Saw vs Pole Pruner – Which Is Better?
A pole saw tends to be better for larger branches while a pole pruner is ideal for smaller limbs.
A pole saw also can cut more types of materials, but pruners are easier to maintain. Pole saws are also much more expensive than pole clippers in general.
However, if you have a large yard that requires regular pruning then the extra cost might be worth it for your peace of mind.
A tree trimming company would normally require 2 or more hours to do a job, whereas you can probably cut down the time by at least half if you use a pole saw.
If your only choice is between having someone else do the pruning for you or doing it yourself then go with the latter because there are tools that are designed specifically to make this task easier for homeowners.
A chainsaw and pole saw are both good alternative tools for pruning. If you want a powerful product, then go with a chainsaw. But if ease of use and maintenance is your main concern, then go with a pole saw.
A pole clipper can be used as an alternative to pruning shears as its small size makes it easier to use around smaller shrubs and saplings.
They can also be used to reach higher hanging branches if a ladder is not an option.
Pole clippers may not have the same cutting power compared to pole saws or chainsaws but they’re lightweight and require little physical strength from the user.
Which One Should You Buy?
If you have a few small trees or bushes that need to be pruned but the branches are not too thick, a pair of pole clippers can suffice.
If you have a few larger trees and require more power to cut through thicker tree limbs, then a pole saw is probably your best bet.
However, if you don’t want to spend a fortune on a power tool that you might only use occasionally, then pole clippers are cheaper and easier to maintain.
It’s important to remember that not all poles saws are created equal.
Look for one that is lightweight, yet durable enough to cut through tree limbs up to two inches in diameter without breaking or bending out of shape.
Pole pruners are ideal for small gardens with a few low-hanging tree branches, whereas pole saws are more effective in large yards that have several trees with thick branches.
The bottom line is that both tools can greatly reduce your gardening time and allow you to prune your trees quickly and efficiently without having to climb ladders or use complicated rigging systems.
Both pole saws and pole pruners are ideal for anyone who doesn’t feel comfortable handling a chainsaw or simply want to save time by avoiding the tedious task of climbing the ladders every day.
The type you choose depends on your needs, but either one can have a huge impact on your gardening routine.
How to care for your new purchase.?
After using your new product make sure you clean it thoroughly to remove all debris from the blades.
Make sure not to use a high-pressure hose on pole clippers, because this could damage the blade by knocking it loose from its attachment.
If you have used a pole saw then be sure to oil the blade before putting it away for storage.
Why it’s important to choose the right tools for the job, even if they’re more expensive than alternatives.?
Choosing the right tool for a task can have a huge impact on your productivity.
If you have to use a chainsaw to cut branches that are only an inch thick then it will just take longer and require more effort from you, making it less appealing than using a pole clipper or saw.
Another reason why you should choose the right tool for the job is that it will greatly reduce the risk of injury.
Using a chainsaw on branches that are too thin can cause it to kick back, which could result in severe injuries like broken bones or deep lacerations.
Using pole saws and clippers at the incorrect angle or in an unbalanced position can result in slips and falls, which could cause injuries like bruises or broken bones.
If you’re wondering whether it’s easier to use a chainsaw, pole saw, or pruners, then here’s your answer:
It depends on the tree limb, the kind of saw that you’re using, and your physical strength.
They can all be effective in cutting thick tree limbs if used correctly, but pole saws are perfect for smaller branches while chainsaws are better at handling thicker ones.
On average it takes about 7 minutes to cut 1 inch through a tree limb with a pole pruner, whereas a chainsaw can do the same job in 1 minute.
If you use a pole saw instead of a pruner, it will take about 3 minutes to cut through 1 inch of a tree limb.
What are the benefits of a pole saw over a pole pruner.?
Pole saws and pole pruners both do the same job – cutting branches – but they go about it in different ways.
Pole saws are ideal for heavy-duty jobs because they can cut through tree limbs up to 2 inches thick without bending or snapping.
One of the most common reasons why people choose a pole pruner instead is because they feel the branches are too small to cut with a saw.
A pole saw has a longer reach than a pole clipper, which means you don’t need to climb as high up on ladders and it takes less effort and energy to get the job done.
Are more expensive tools worth it?
Purchasing an expensive tool might initially seem like a waste of money, especially if you’re just using it to prune small branches.
However, if you consider that reduced exposure to injuries and increased speed will help you save time and reduce the risk of injury then it’s easy to see how it can be worth spending more for better quality tools.
What are some different types of pole saws and pole clippers on the market today?
There are two main types of pole pruners on the market: anvil-style and bypass. Anvil-style pruners cut through branches by pressing them against a flat metal surface called a blade, like a knife cutting against a chopping board.
Bypass pruners have a sharpened blade that slides past another blade to cut. Pole saws come with different types of blades, depending on the size of the limb they need to cut through.
The most common type is a curved blade, which resembles a scythe and is great at cutting thick branches and limbs up to 18 inches thick.
How should I take care of my pole pruning tools?
If you’re using your pole clipper or saw frequently, then the blades will get dirty and need to be oiled before you put them away.
Keeping the tool in good condition will make it more durable and easier to use, which means you’ll get fewer injuries while completing tasks.
What are the risks associated with using pole saws and pole pruners?
While using a pole clipper or saw can be an effective way to speed up pruning jobs, they do come with some safety risks.
Pole pruners tend to have shorter handles than chainsaws, which means it’s easier for your hands to come in contact with the blade.
If you’re using a pole saw, then the tree limb can also get caught in the saw and either stop it from moving or cause your hands to slip.
If this happens, then there’s a high risk of lacerations and fractures because of how small and quick they are.
Do I need any special training to use a pole saw or pole pruner?
If you’re using your tools for the first time, then it’s recommended that you get some training on how to handle them safely.
This will help you avoid potentially dangerous situations and injuries. You should ask your employer if they offer any type of training program where staff can learn how to use tools like pole saws and pole pruners.
Which types of trees are best for cutting with a pole saw.?
A pole saw can cut through a wide range of tree branches and limbs, although the blades tend to perform better on harder wood.
The ideal type of tree for cutting with a pole saw has small branch connections such as an oak or pine tree.
These trees contain layers between their branches so you can reach all areas around the trunk by moving a pole saw in a circular motion.
Tips on how to maintain your blades and extend their life span.?
If you’re using a pole saw and it gets stuck, then there’s a high risk of the tree limb damaging your blade.
This can weaken both the teeth and cause them to lose their shape over time. One way to maintain your blades is by applying oil, which will help prevent rust and protect them from debris.
Pole Pruners: (TIPS)
- Maintain your blades with oil and sharpen them if needed.
- Apply a pole saw lubricant to the blade teeth to improve performance.
- When using a pole pruner, always have your back against the trunk while holding onto a branch with your free hand.
- To avoid injuries, use a pole pruner instead of coming into direct contact with the tree limb.
Pole Saw: (TIPS)
- Do not use lube on the blade; it will cause tree sap to clog up the teeth and diminish its ability to cut.
- When using a pole saw, one should keep their free hand in front of the blade guard. This will prevent debris from getting inside and make it easier to clean them when done.
- One or two hands should be used depending on the size of branch you are cutting through.
- Never stretch yourself too far while using a pole saw, always maintain a firm grip and keep the weight of your body on a platform.
A Pole Saw and a Pole Pruner both have their advantages, but there is a time and place for each.
A pole pruner should be used while working directly with the tree while a pole saw ought to be utilized while reaching tough spots from a distance.
Hopefully, this has given you a small idea of what tool might benefit you most in a given situation.