When it comes to finding the best manual tile cutter, you have come to the right place!
This article will provide information on how you can make an informed decision on which type of manual tile cutter is better for your projects.
We reviewed a variety of user feedback and expert opinions from various sources all over the web.
From that, we were able to find a winner as well as two runner-ups for this article.
What is Manual Tile Cutter?
A manual tile cutter is a tool that can be used for cutting ceramic tiles.
This tool works by scoring the top of the tile with a sharp wheel on one side of the cutter which then allows
you to break off pieces until you have reached the desired size/shape of your tiles.
There are three different types of manual tile cutters:
1) Handheld Tile Cutter – The handheld tile cutter comes in two varieties, “drop-center” and “hanging-grid”.
Both function similarly in that they allow users to score and snap pieces easily.
However, what separates these two from each other is how they handle changing workpieces.
2) Bar-Pressure Hand Held Tile Cutter – These work similar to drop center tile cutters, but use a bar-like mechanism to change workpieces.
This type of cutter allows for easier and faster tile changes than the handheld tile cutters mentioned above.
3) Standing Tile Cutter – The standing tile cutter is different from other types in that it must be clamped down while in use.
It has a base that can support tiles up to 15 inches by 15 inches and
comes with either an adjustable fence or a rail system that offers adjustability for angles.
Pros and Cons of Using Manual Tile Cutters:
Although manual tile cutters are generally cheaper than other types such as wet saws,
they do tend to have more disadvantages compared to their electric counterparts:
1) Time Efficiency: Most users agree that although manual tile cutters are cheaper,
they do take more time to use compared to wet saws.
This is because you have to score the tiles manually with your hands and then snap them off afterward.
2) Tile Size Limits: Since there is no automated mechanism on most manual tile cutters,
they only work for small projects involving ceramic tiles that are 12 inches or less in size.
3) Accuracy: It can be very difficult for users of manual tile cutters to get an even edge compared to electric tile saws.
For example, if the front side of a tile has different levels than the backside after scoring,
it can make it harder for the user to break off pieces of equal sizes across all sides.
This is why it’s important to consider the type of project you are doing, your skill level with cutting tiles,
and how much time you have before deciding which kind of tile cutter to use.
Now that we’ve covered what a manual tile cutter is and its pros/cons,
let’s move on to finding out which ones are the best currently in the market right now!
Here are the top three manual tile cutters based on numerous reviews from customers who have used them throughout the years:
Here Is Some Best Manual Tile Cutter
- QEP 10900Q 35-Inch Manual Tile Cutter
- CO-Z Manual Tile Cutter
- VEVOR 47 Inches Tile Cutter
- Sigma 6053820 Pull Tile Cutter
- QEP 14 inches Tile Cutter
1. QEP 10900Q 35-Inch Manual Tile Cutter
If you’re looking for a manual tile cutter that’s as easy as possible to use, then the QEP 10900Q is perfect for you.
Although it doesn’t have any automated mechanisms such as those found in wet saws,
this manual tile cutter makes up for it by being so lightweight and portable which allows users to easily maneuver the tool even on smaller tiles.
The blade on this cutter is made from tungsten carbide material so it won’t wear out very easily either.
On top of all of its convenience,
this product comes with a limited lifetime warranty so you can always get your money back for this item if it does somehow break.
Ease of Use – The QEP 10900Q is very simple to use.
All the user needs to do is snap on both sides of the tile after they score it and
twist the knob in order for the tiles to break off at an even level.
The scoring wheel allows users to make straight marks on their tiles with ease,
but one thing that’s not great about this model is how difficult it can be for some people to rotate or remove pieces once they’ve been snapped off from the front side.
Keep in mind that rotating workpieces are necessary when working on projects
where you need pieces of different shapes/sizes (e.g. around bathtubs or shower stalls).
Durability – The QEP 10900Q is made from cast aluminum
which doesn’t fully protect the tool at all especially when it comes to dropping it on the ground.
Make sure you only use this product for decorative tile projects so your tiles can stay in top condition afterward.
- Very easy to use
- Lightweight and portable
- Limited lifetime warranty
- Difficult to rotate tiles after snapping them off the front side (may require need extra tools)
2. CO-Z Manual Tile Cutter
If you’re looking for a manual tile cutter that won’t cause
you to waste too much time getting your tiles ready for your project, then the CO-Z is perfect for you.
This product has an automated process so it requires no hand-scoring at all.
All the user needs to do is attach their tiles onto the cutting blade and slide them along it while holding down a handle –
which cuts through ceramic materials like butter.
Also, what’s great about this product is how easy it is to rotate workpieces without breaking any of them apart.
Ease of Use – The CO-Z may be one of the most convenient products on our list thanks to its automated process.
Users can simply attach their tiles onto the cutting blade and slide them across it with a handle to get perfectly cut-off pieces.
Rotating workpieces is also very simple to do thanks to this cutter’s design since there are no small parts that need to be removed from the front side.
Its lightweight construction allows users of all skill levels to easily maneuver this tool with ease.
Durability – The CO-Z cutter is made from galvanized steel so it won’t break apart on you while working on your projects.
However, one thing that some people dislike about this product is
how difficult it is for them to reattach/remove tiles once they’ve been snapped off the front side by accident.
Keep in mind removing individual pieces may require extra tools.
- Lightweight and easy to use
- Automated cutting process
- Tiles snap off the front side very easily (can sometimes require extra tools for removal)
3. VEVOR 47 Inches Tile Cutter
If you want a manual tile cutter that’s similar to the CO-Z but bigger, then the VEVOR 47 is perfect for you.
This product also has an automated cutting process so there’s no need to waste time scoring tiles manually.
It features a range of adjustable angles which allows users to get precise cuts on their tiles for projects with
different types/shapes of borders (e.g. around showers or bathtubs).
Also, what makes this tool even cooler is how it can break light porcelain and
ceramic materials with ease thanks to the diamond blade included within it.
Ease of Use – The VEVOR 47″ can be adjusted horizontally in order to get
precise angled cuts on your tiles while also holding them in place with non-slip suction cups.
Rotating workpieces is very simple to do on this cutter,
but one thing that makes it different from the CO-Z is how difficult it can be for
some people to clean up any leftover or excess material stuck between their tiles.
Durability – This product is made from ABS plastic which provides more protection against dropping so your tiles remain undamaged afterward.
However, since this tool doesn’t have a scoring wheel there are times
where users may have difficulties getting equal score lines across all workpieces.
- Can break light porcelain and ceramic materials easily
- Diamond blade included within the cutting head
- Very easy to adjust horizontally/vertically for angled cuts
- Difficult to clean up/remove any leftover material
4. Sigma 6053820 Pull Tile Cutter
If you’re looking for a manual tile cutter that features a scoring blade, then Sigma 6053820 might be a good option for you.
This product has a pull action that snaps tiles off their front side and makes it easier to prepare them for projects since there’s no need to use extra tools.
Also, this product is very lightweight so even beginners can get the job done without getting tired from holding it down while cutting.
Ease of Use – One thing that users love about Sigma 6053820 is how easy it is to rotate workpieces after snapping them off their front side.
An adjustable guide also helps users snap ceramic materials straight while being able to score up to 10 different types of flooring surfaces with ease.
Durability – This product is made from steel which makes it very durable to use on different types of projects.
Also, since this tool doesn’t have any part that rotates, users will never need to replace any small parts within it (e.g. springs).
- Steel body provides durability for frequent usage
- Easy to rotate workpieces after snapping them off the front side
- Score up to 10 different flooring surfaces with ease
- Not suitable for large tiles/ceramic materials because of its size limitations
5. QEP 14 inches Tile Cutter
If you’re looking for a manual tile cutter that’s suitable for large tiles then QEP 14 might be your best option.
This product can support up to 700 pounds of pressure since it has extra-thick steel cutting plates
which allow users to score big projects faster without having to reset their workpieces multiple times.
Ease of Use – QEP 14″ features an adjustable backstop bar so users can get precise angled cuts on their tiles for different types of projects.
Also, this tool doesn’t have any rotating parts within its body so there will never be times
when users need to replace/repair it with extra tools (e.g. screwdrivers).
Durability – This product is made from ABS plastic on its backstop bar but has extra-thick steel cutting plates which makes it very durable to use.
- Made from ABS plastic & extra-thick steel cutting plates for durability
- Can support up to 700 pounds of pressure
- Features an adjustable backstop bar for precise angled cuts on different types of projects
- Cannot score porcelain/ceramic materials easily because of the blunt force applied onto them due to their higher weight limits
A manual tile cutter is used to score materials before snapping them off of their front side.
This process is very helpful because it prevents users from having to use extra tools (e.g. screwdrivers) or risk chipping/breaking tiles within the cutting process.
Also, since everyone has different needs, there are times when some people may prefer
certain products over others (e.g. those who need a larger cutting area vs those who only focus on small projects).
The best way for you to find out which product will work best for your projects is by considering these important factors:
Manual Tile Cutter Size – Not all tools come with adjustable backstop bars and this can be a if you’re looking for something that can support different types of projects.
However, while some manual tile cutters are large enough to take on big projects,
smaller tools are only suitable for small tiles or practice cuts before moving onto larger ones.
Cutting Depth – The cutting depth is the maximum thickness/depth that your tool’s scoring blade can go through when being used.
Some manufacturers don’t mention this specification
but if they do then you should always refer back to it to determine whether or not that product will work well within your needs.
Score Type – Since there are two different types of scores (i.e. V-score vs snap score),
users need to know which type of project they’re using it for so they know which one will get the job done.
Q: How much does a manual tile cutter weigh?
A: Usually less than 5 lbs. but this value will vary from product to product.
Q: How is the cutting depth measured?
A: It’s generally measured by using inches or centimeters.
Q: Why should I get one that comes with an adjustable backstop bar?
A: If you’re working on tiles of different shapes/sizes then you might need to score them in multiple ways (e.g. snap vs V-score).
Also, having something that can hold up against uneven surfaces will allow users to create straight lines for their projects especially
if they don’t have enough experience yet to do so reliably without breaking anything.
If you want more information about these factors then you should refer back to this
article as it’ll help you decide which product will work best for your needs.
As you can see, there are a lot of advantages that come with purchasing a manual tile cutter and
the best way to find out if it’ll work well for your needs is by considering these important factors:
Size – This will depend on the type of projects that you’re working on.
For example, those who need something larger should get one with an adjustable backstop bar
because this feature allows users to score across different types of surfaces.
Depth – Make sure that you know how thick/deep your tool’s blade can go before buying one.
Also, some manufacturers don’t mention their products’ depth specifications so refer back to our buying guide in order to be 100% certain.
Score Type – If you’re working on projects that require both V-scores and snap scores then it’s best to get something with an adjustable backstop bar.
This way, you’ll be able to create straight lines without worrying about breaking tiles.
A manual tile cutter is a great tool for those who want to score their materials before snapping them off of their front side.
Since there are different types of project needs,
it’s extremely important that users carefully consider these three factors so they can find the right product that works well within their expectations.
Once you’ve done this successfully,
it should be much easier for you to decide which one will work best for your needs so don’t hesitate to check out our buying guide if you need more information.
Hopefully, you’ve found this article helpful and refer back to it whenever you’re in need of more information about manual tile cutters before purchasing one.