When you have a pole saw, the last thing that should be on your to-do list is cutting downtime for maintenance.
But if this slimmest of jobs needs attention and discretion when performing.
it well can mean everything in between being able to maintain an extended tool life or preventing future headaches through regular upkeep procedures. here’s what we found!
Doing some research into how often these tools need servicing will help tremendously with maintaining good performance under meticulous care from now until eternity.
Before Using the Pole Saw:
Proper maintenance of the pole saw will help you avoid downtime. The following are some tips to keep in mind:
When tension is applied, check for tightness by prying up on both front handles and back grip with one hand while pushing down hard with your other hand;
Before cutting anything long or thick make sure the blade has enough room between board
The trigger and lock are extremely important for safety. They should work well the first time you use your pole saw, otherwise there could be an accidental cutout.
when in operation or if someone else uses it later on without checking everything properly they might end up causing injury.
Make sure this feature is working correctly by observing how hard each part has been pulled back before releasing them fully again
Sometimes the blade may become tangled with shredded wood pieces that have stuck themselves together.
due to moisture build-up inside since these types of blades rely more heavily upon airflow rather than oil circulation.,
After Using the Pole Saw
These maintenance tips for the pole saw will help you to keep your tool in optimum condition and prevent any accidents.
The following steps should be performed after each application:
Clean off all debris from blade housing, guard plate covering mouth of the cylinder head with a damp towel or cloth.
Wipe down motor casing – this includes both sides as well Check belt tension by pulling up slowly on it while looking through sight hole at bottom front.
When needed to tighten outermost black bolt which holds reel handle onto power unit Replace the cover over cable gland Inspect belts
Cleaning the pole saw blade is important for maintaining its condition.
You should use a rag to wipe out any debris and dust from it carefully, waiting until cool before washing bar saw blades.
this way you can prevent burns on your hand while cleaning or using them too quickly after being cleaned in order that they last longer than usual.
Be sure also clean protective cover of either type regularly as well;
otherwise, these will get dirty again very soon. When done wiping off all icky grime with proper care both woodworking tools become sharper.
because there are no dirt particles getting inside when fitted onto their respective places which mean better performance next time around due purely down adequate maintenance measures
Always check the lubrication oil level of your pole saw before you start operating it.
If there is not enough for an extended period, then refill as soon as possible or consider replacing with new motor oils that have been manufactured specifically for use in this type of equipment.
Clean off any leftover vegetation from around park edges near power lines after cutting wood to avoid accidental contact between blades and branches which could cause injury.
After each project makes certain all parts are securely fastened back into place so nothing goes flying during operation through vibration.
especially if one component fails leading others coming loose creating more risk factors
How to keep your pole saw running smoothly:
- Always oil the blades after cutting with it, never before!
- Check if there are any burrs on the blade by using sandpaper or files.
- If you use an electric pole saw power outlet connection needs repairing
- It also makes sure the spark plug doesn’t have leaks and pitting
- Lastly check for clogging in filters
Maintaining a pole saw is easy once you are the know-how.
Follow these maintenance tips for your particular type of equipment, and it should last quite a while.
In addition to the basics like oiling blades or changing air filters on occasion- check out any other instructions in the user manual as well if there’s anything specific about this device that needs attention.