Maintenance Of Pole Saw
Maintaining your pole saw is very important because it ensures the proper performance of your equipment.
If you do not maintain your pole saw, or forget to check on it before using it; there may be problems that arise during use.
Follow these simple steps below for regular maintenance on your pole saw, and they will help keep it in good working order all season long.
Five Simple Steps
Step one: Check the chain tension
Make sure that you check the tension on the chain frequently; this will ensure that it stays taut.
This prevents bind-ups that can cause damage to the chainsaw itself.
Look for loose links and tighten them accordingly with a screwdriver or Allen wrench. Be careful not to over-tighten the links; this can also cause damage.
Step two: Lubricate your chain
Just like any other part of your equipment, it needs lubrication! Apply a wet bar of soap or add some cooking oil to the blade and let it sit for 30 minutes before using.
This will prevent rust from forming on your chainsaw blade while it’s not in use, and maintain its sharpness when you go to use it next time.
Step three: Keep it clean
If you use your pole saw primarily around dirt and mud, keep a small wire brush handy so you can knock off debris that builds up while not in use.
Also, check yourself while operating the machine; if there are any loose pieces hanging off, fix them immediately.
Step four: Get your fuel stabilizer
If you are planning on storing your unit over the winter months, fill up the gas tank to capacity with a fuel stabilizer before doing so.
This will prevent corrosion from forming inside of the engine after sitting idle for long periods of time. Read more about this step here!
Step five: Clean the unit before storage
Remove dirt and debris from your unit before storing it; this will help prevent rust build-up.
Some units come with covers that can be used to protect the exterior while not in use, but if yours does not there are other ways you can go about protecting your investment.
Read more here!
Remember these easy steps for maintaining your pole saws to save yourself time, money, and frustration next season!
Packing List Of Pole Saw
If you are going to go on a camping or fishing trip, you may need some tools such as a saw, ax, and others. The following is a list of pole saws.
Weedeater: this is the most frugal choice for people who want to cut small branches easily. All you have to do is buy one and hook up some extension cord and start cutting the branches with your desired length easy and fast without any hassle at all.
Extendable pruner: this is the best choice for people who live in a rural area with big backyards since it has a long reach which allows them to cut tree branches that are hanging or high above overhead obstacles such as power lines or rooftop overhangs, especially if they don’t want to get on a ladder.
Extendable saw: this pruning tool is used for major wood cutting projects that include the cutting of large tree branches, completion of full tree removal, and even firewood preparation tasks. This best option suits people who really need to do lots of wood cutting in their daily life either for work or home improvement projects since it can cut big tree branches with ease and speed without much hassle at all.
Pole Saw: people who need to deal with tall trees, hedges, or shrubs often face difficulty in reaching these places especially when they are not equipped with any proper tools such as ladders, etc. For them, this pole saw is a perfect solution that allows them to reach out to difficult places with ease.
Telescoping Saw: this tool is mainly designed for outdoor use and it is most suitable for people who need to maintain tall trees, hedges, or shrubs on regular basis. This best option suits professional landscapers or arborists since it can be used in tight spaces where larger saws cannot reach out easily. It has a long blade that helps to cut through resistant wood like cedar quickly without wasting too much time on one job.
Tree Pruner: these are specially designed tools that allow you to trim branches off of certain types of trees without harming them too much which is most suitable for fruit tree owners who want to keep their trees healthy by the damaged branches at any desired length.
Tree Saw: these tools are designed for cutting away larger tree branches from the main trunk at any desired length quickly without too much hassle. However, this tool is dangerous to users so if you need to use it, make sure you read the instructions carefully before using it.
Limbing Saw: while power saws or axes can cut through small branches easily, some jobs may require a limbing saw which cuts smaller branches that have fallen on the ground and create a safety hazard.
Pole Pruner: if your trees grow in a way that makes trimming them with pole pruners difficult, this best option allows you to reach out up high safely without climbing onto ladders or climbing spikes.
Pruning Shears: this is one of the most common tools used for branch pruning chores around your home, garden, and lawn. Everyone should have these types of hand pruners for small clean-up jobs due to their portability, ease of use, and safety features which are not possible with larger cutting tools that can be heavy and dangerous to operate without proper training
you should maintain your pole saw on a regular basis to keep it running smoothly and prolong its lifespan. This can be done by cleaning the debris from the blade after every use, checking the crank handle for any possible damage that may cause problems when used, and removing dirt or rust from places where there is heavy exposure to moisture all of which are very important in maintaining your pole saw properly.
Before setting out to work with your pole saw, make sure that you have all the following safety equipment on hand to avoid getting injured or worse while working. Protective eye gear, hard hat, gloves, earmuffs, long-sleeved shirt and pants, chain oil for lubricating the chain blade of the chainsaw.
How To Use A Pole Saw
Making this tool work for you successfully is not difficult at all and takes only a few minutes of your time.
Here are the 4 simple steps to follow when using a pole saw
- Choose Your Pole Saw
Before operating any tools, know what type of device you are going to use for the job that needs to be done especially if it’s something as dangerous as working with chainsaws or power saws which can cause injury if not used properly.
- Prepare Your Work Space
It is important to make sure that no one will enter your workspace while you are doing a task with a pole saw since these types of tools can easily injure people nearby.
- Trim Branches/Limbs
Depending on the type of tree trimming job you are doing, this step can vary greatly. If your task is to cut smaller trees with a pole pruner, then it takes only 5 minutes to complete the job with little or no skills required.
- Clean-up Your Work Space
After finishing up with your work, make sure that you clean up all debris and dispose of them properly instead of throwing them away or leaving them around which can cause possible injury for people who come in contact with these remnants later on.
How To Clean Your Pole Saw
After each use, you should clean your pole saw to make sure that it is in perfect condition for the next time you need to use it. This process should take only a few minutes of your time to avoid getting dirt or debris caught inside where they can create many problems later on.
Here are simple steps to follow when cleaning your pole saw
Clean The Chain Saw Blade
The first step starts with removing the chain from the bar so you can remove any dirt trapped inside by blowing compressed air through both ends of the chainsaw’s drive links. You should then spray lubricant over all surfaces that have been exposed to contact with the material being cut including under-side surfaces which are difficult to reach while working before sliding the chain back onto the bar.
Clean The Pole Saw Handle
After you are finished cleaning your saw blade, it is time to move on to the next step which involves cleaning any dirt or debris that may have accumulated inside the pole saw handle. All you need to do is spray lubricant in all joints and crevices before wiping off excess lubrication using a wet rag since too much oil will cause damage over time.
Clean The Chain Saw Bar
Once you are finished with cleaning other parts of your chainsaw, it’s now time to remove all dirt trapped under surfaces that are hard to reach when working by spraying compressed air into each groove while sliding the chain back onto the bar surface. After this process, you should lubricate all chainsaw parts before you reassemble them to make sure that everything is well-oiled and in perfect condition.
Clean The Pole Saw Engine
After finishing up with your chain saw, it’s now time to move on to cleaning the pole saw engine which only takes a few minutes of your time depending on the model of engine that your device uses. The steps are quite simple and can be completed in just 3 easy steps that require spraying into every crevice where dirt may have accumulated over time before wiping off excess lubrication using a clean rag. This entire process should take less than 10 minutes to complete since this part doesn’t need much attention.
You should always remember these simple steps when using any type of pole saw or power saws to help you get the job done quickly and safely even if you have no prior experience. however, it is important to seek professional advice from a local specialist who can tell you more about your specific model before doing a task that has a higher risk of injury.