Overview Of Circular Saw
Circular saws are very useful in performing various functions.
They are designed to be used by specific professionals with the aim of cutting large objects into smaller pieces.
This is achieved through the use of blades that rotate rapidly.
There are two different types of circular saws, corded and cordless models.
The following article will discuss some of their characteristics including which one is more suited for certain tasks as well as highlighting what is generally considered better between them now.
What Is Corded Circular Saw?
This is a type of circular saw that is connected to an electric power source by means of a stretchable cord.
The blade is fitted with teeth at its sides as well as at the cutting end.
It is always powered by electricity and it comes in different sizes ranging from 6 inches to 18 inches.
What Are The Advantages Of Corded Circular Saw?
The corded circular saw has a very long power cable, which enables it to be used in any location without the need for an extension cord.
It does not run out of battery quickly as its counterpart does.
The corded model can cut through a large number of objects including wood, metal, and plastic among other things.
It is more powerful compared to its cousin making it more suited for heavy-duty tasks.
This type of circular saw emits much less noise compared to the cordless one during the operation.
The blade used by this device is replaceable unlike that found with the cordless version which cannot be detached from the body of the tool, 7 inches, and 9 inches; they all operate at different voltages (12V, 18V, and 36V).
What Is Cordless Circular Saw?
A cordless circular saw, also commonly referred to as a cordless reciprocating saw, is designed for mobility.
It does not need an electrical outlet like the one needed by the corded model since it runs on batteries that are rechargeable.
Cordless models come in various sizes including 6 inches, 8 inches, 12 inches, and 14 inches.
They are mostly preferred because their mobility allows the user to have more freedom of movement when working.
What Are The Advantages Of Cordless Circular Saw?
The cordless circular saw provides more maneuverability since it does not have any cable.
Cables are the ones that restrict movement in most cases when operating this tool.
Cordless models offer higher revolutions per minute (RPM) compared to their counterparts due to the absence of the engine block, which is usually very heavy.
This feature makes them more efficient when cutting through hard substances like metal or masonry among other materials.
A cordless model has a lot of power since its battery can be recharged continuously while running, unlike its counterpart which runs on an electrical outlet providing limited power each time it is charged.
The cordless circular saw emits less noise during operation because it uses batteries rather than fuel, therefore there is no combustion taking place.
Which Is Better Corded Or Cordless Circular Saw?
Now on the main question, which one is better between corded and cordless circular saws; the answer is very complex.
Some people would prefer using a corded circular saw since it is more powerful and efficient when it comes to cutting through tougher materials like metal.
The weight of this type of tool is evenly distributed in comparison with its counterpart because all its components are attached together making it less prone to slipping from the user’s hands due to fatigue or continuous use for a long period of time.
On the other hand, if you want a powerful tool that offers an excellent range of motion, then you should go for the cordless circular saw.
It has no limitations when working such as not being able to cut through a certain material because of its cable.
As is the case with most power tools, when using cordless circular saws you need to have spare batteries in order for them to be used continuously without interruptions due to battery draining.
In addition, the cordless model has a lower weight compared to its counterpart making it easy for people who are physically weak or even small children to use.
Circular Saw Blades
Both corded and cordless circular saws come with their own blades which are used for cutting objects under construction.
The number of teeth that a blade has determines how much air passes through it while at the same time increasing its speed.
A blade with more teeth is generally considered better since it cuts smoother compared to one with low teeth count.
This type of blade also lasts for longer periods but they are relatively expensive as opposed to those with many teeth and less money to spend on them.
Corded vs Cordless Circular Saw
Cordless Circular Saws
The cordless model has its positive points, however, it also comes with some disadvantages when compared to the corded version.
This model can be used just anywhere as long as there is a power source nearby.
It does not limit the user to one location due to the absence of cords, which are often seen as obstacles when working with circular saws.
However, this advantage also means that it will run out of power rather quickly if not plugged in constantly.
Since it is battery powered, it tends to be more expensive than the corded type and has limited battery life (average time about 10 minutes).
Corded Circular Saws When compared to the cordless model
They tend to be cheaper and lighter than their counterparts.
The cost-effectiveness and portability make them more appealing for most users especially those looking for a reliable circular saw.
They have the advantage of being more powerful and they maintain their blades’ speed from start to finish, even if plugged in constantly.
Corded models however do not differ in terms of cost-effectiveness when compared with cordless ones as it is largely dependent on the model used.
Pros Of Corded Saw
- Due to the fact that corded circular saws are lighter, they are easy for people with relatively lower physical strength to operate.
- The blades do not run out quickly when working continuously because of the constant energy provided by the power source.
Cons Of Corded Saw
- They are often limited in terms of freedom since they must be plugged into a power source that has its limitations due to distance and other factors affecting it such as damaged cables or accidentally unplugged cords.
- Maintenance is also required more frequently than before since their components require proper lubrication to keep them functional while at the same time prolonging their lifespan.
Pros Of Cordless Saw
- They are the best choice for people who prefer greater mobility, especially when working at height or in narrow spaces.
- You can easily fit them into small storage spaces given that they do not require large cords like their counterparts. Cons Of Cordless Saws
- Their cost-effectiveness is greatly reduced due to increased operational costs because of frequent battery changes. This model also does not maintain speed over time so it cannot be used continuously without notice if the battery dies out.
Cons Of Cordless Saw
- They do not have the same power as corded types which makes them less reliable especially when it comes to cutting through harder materials.
- Since their blades cannot maintain a constant speed, they cannot be used with solid timber or concrete due to their tendency to damage the blade itself.
- Cordless saws are also not recommended for jobs that require accuracy.
Cutting Depth & Rip Capacity
The cutting depth determines how much thicker materials the circular saw can cut through before needing to retract so that it doesn’t overheat or damage the components of the saw itself.
The rip capacity specifies how wide a material you can cut using your circular saw.
This may vary from model to model so check under the specifications section of each individual model before deciding which one would work for your specific needs.
One thing you need to consider when buying a cordless circular saw is the number of amps in the battery/batteries.
The higher the amps, the more power it can put out during usage and vice versa.
Check your project plans to get an idea of how many amps you should have so that you don’t run into any problems while working.
Another thing to keep in mind is the size of the battery pack since this also determines the length of time before needing a recharge depending on what type of model it is and whether or not there are extra batteries available for purchase if you require a spare.
As long as you have all these factors considered, this will help narrow down which one fits your needs best making it easier to determine which one would work well for your intended use.
This is a very difficult decision given that both types come with unique benefits that make them appealing in different ways.
However, the better circular saw between the two will depend on one’s preference and budget range.
A corded model would suit you best if the lack of added weight and costs is what you are looking for while having a power supply nearby throughout your cutting job is also important.
It has many useful applications since it tends to be lighter and powerful. On the other hand, if you do not mind added weight or reduced portability or if there is no need for a constant power supply throughout your cutting job, then the cordless model would suit your preferences well.
It is great in terms of cost-effectiveness since it operates on battery power only which means that its cost will not escalate even when buying new batteries.
However, it should also be noted that this type’s battery life tends to be shorter than the corded version.