• Skip to primary navigation
  • Skip to main content
TheSawTools

TheSawTools

Expert Reviews Covering All Saws

  • Band Saws
  • Table Saws
  • Pole Saws
  • Circular Saws
  • Wet-Tile Saws
  • Woodworking
  • Blog

7 Best Budget Table Saws Under $300 – Expert Reviews

November 23, 2021 by Lucas Henry Leave a Comment

Table of Contents

  • 7 Best Table Saws Under $300 – Expert Reviews
    • 1. Shop Fox W1837 10” 2 hp Open-Stand Hybrid Table Saw
    • 2. RIDGID R4512 10” 13-Amp Cast Iron Table Saw
    • 3. DeWalt (DWE7491RS) 10” Table Saw
    • 4. Bosch Power Tools 4100-10 Table Saw
    • 5. Rockwell RK7241S Table Saw with Laser
    • 6. SKILSAW SPT99-11 10” Heavy Duty Worm Drive Table Saw
    • 7. DeWalt DW744XRS 10″ Job Site Table Saw with Rolling Stand
  • Buyer Guide:
    • 1. Two types of motors
    • 2. Blade size
    • 3. Safety features
    • 4. Fence design
    • 5. Dust collection
    • 6. Availability of aftermarket components
    • 7. Warranty
    • 8. Noise level
  • Faqs:
  • Conclusion:

Everyone has their own budget and taste when it comes to tools.

So if you’re looking for a table saw under 300$ then you must be aware that there are not too many of them on the market.

However, we managed to find the best ones and if you’re in a rush and don’t want to read our whole article you can simply choose one from this list:

All of these table saws come with standard features such as a fence system, miter gauge, etc.

The size is small enough so they can be easily transported when needed for example when you’re cutting something heavy or just.

When it’s time to do some replacement on your old portable table saw (which cost around 200$ by the way).

If money is not an issue for you and top-quality top performance are your goals then I suggest reading our articles about the best contractor table saws and cabinet table saws.

We tested some, we compared some and we listed some, so here below we present our 7 best picks at the moment

7 Best Table Saws Under $300 – Expert Reviews

  • Shop Fox W1837 10” 2 hp Open-Stand Hybrid Table Saw
  • RIDGID R4512 10” 13-Amp Cast Iron Table Saw
  • DeWalt (DWE7491RS) 10” Table Saw
  • Bosch Power Tools 4100-10 Table Saw
  • Rockwell RK7241S Table Saw with Laser
  • SKILSAW SPT99-11 10” Heavy Duty Worm Drive Table Saw
  • DeWalt DW744XRS 10″ Job Site Table Saw with Rolling Stand

1. Shop Fox W1837 10” 2 hp Open-Stand Hybrid Table Saw

Shop Fox W1837 10” 2 hp Open-Stand Hybrid Table Saw

The Shop Fox W1837 is a hybrid table saw. It’s compact, versatile, and has many features.

This machine gives the user the best of both worlds: on one side you have the portability of a circular saw or hand-held power saw,

While on the other side you get the functionality of an industrial-style table saw.

One good example of this is its interchangeable 10” steel plate which can be replaced easily with accessories like throat plates for dado cutting, feather boards, etc.

Take note that this equipment comes without any miter gauge or fence system included.

So if you don’t already own these then you will need to buy them separately but that won’t cost too much money considering that they are not very expensive in general.

Another good point to mention is that the Shop Fox W1837 runs on 120 volts, which means it can be plugged in pretty much anywhere.

Although this table saw is considered portable, I wouldn’t take it everywhere with me because of its weight.

The shipping weight is around 50 lbs but when you add the actual weight of the equipment itself (29 lbs for example).

There are some accessories you might want to grab before heading out with this tool in your trunk.

PROS:

It comes with a good size 10” steel plate

It can be used for various purposes such as cutting wood, metal, or drywall.

It has an easy set-up process

CONS:

Takes up a lot of space when in use.

Not enough power for large projects.

2. RIDGID R4512 10” 13-Amp Cast Iron Table Saw

RIDGID R4512 10” 13-Amp Cast Iron Table Saw

The RIDGID R4512 is a heavy-duty table saw that comes with a powerful 13-amp motor and ample cutting space.

It is designed to be very sturdy but still light enough for portability purposes.

It’s not meant to be carried around all the time, though it’s ideal for workshops and other similar places.

Note: if you’re looking for something more powerful then take a look at our article about the best contractor table saws.

Where we reviewed some of the most powerful options on the market.

This particular equipment can handle many types of materials such as wood (soft or hard), plywood, MDF board, laminates, plastic sheets, and much more materials except metal.

Because of its maximum depth capacity when using the miter gauge.

PROS:

Sturdy cast-iron table (made in the USA)

Comes with a powerful 13-amp motor

Easy set-up process and quick blade changes

CONS:

Not ideal for heavy-duty projects.

3. DeWalt (DWE7491RS) 10” Table Saw

DeWalt (DWE7491RS) 10” Table Saw

The DeWalt (DWE7491RS) is a great option for those looking for a high-performance table saw with many useful features.

This equipment comes with the most advanced Precision Rip Fence which allows making fine adjustments and accurate rip cuts up to 26 inches.

On top of that, it has a one-handed bevel adjustment that allows the user to lock in positive angles anywhere between 0° and 47 degrees left or right, making cross-cutting projects much easier.

This table saw is designed to cut woods, metals, plastics, plywood, laminate sheets, and much more materials thanks to its maximum depth capacity when using the miter gauge.

It’s compatible with many accessories such as a T-slot track system (track not included), miter gauge, dado insert plate, router table inserts, etc.

PROS:

It has a heavy-duty cast-iron table (made in the USA

The riving knife helps prevent kickback while increasing safety significantly.

Easy to set up, lightweight (45 lbs), and ideal for portability purposes.

CONS:

There are no drawbacks that I see with this equipment

4. Bosch Power Tools 4100-10 Table Saw

Bosch Power Tools 4100-10 Table Saw

The Bosch Power Tools 4100-10 is another great option for those looking for a 10” table saw that comes with many useful features.

It has an Ultra Precision fence system which increases cutting capacity up to 24-1/2-Inches and provides support for crown molding.

On top of that, it’s equipped with a Gravity-Rise stand that allows the user to fold down the saw in order to get easy access to the table surface whenever necessary.

Which makes this particular equipment ideal when working within small spaces or if you don’t have much storage space at home.

It also includes a miter gauge track guide track and a push stick.

It comes with a 3 years protection warranty against all defects in materials and workmanship.

PROS:

It has a heavy-duty cast-iron table (made in the USA)

Auto carriage lock system for quick adjustments during the cut process.

The riving knife helps prevent kickback while increasing safety significantly.

CONS:

Heavy equipment requires some muscle to bring it up or down from its stand.

5. Rockwell RK7241S Table Saw with Laser

Rockwell RK7241S Table Saw with Laser

The Rockwell RK7241S comes with many useful features that make this equipment really easy to use.

This particular table saw includes a laser guide system for perfectly straight cuts, making any woodworking project much easier.

On top of that, it has an advanced fence design that provides the user more support while cutting up to 24-Inches, whether it’s on crown molding or large panels.

It also has an improved rear outfeed support extension (increased from 18 inches to 25 inches).

It comes with a quick-release riving knife and blade guard assembly for fast and easy access during the cut process.

All these specs come with a 1-year warranty against all defects in materials and workmanship.

PROS

It has a heavy-duty cast-iron table (made in the USA)

The laser guide system allows perfect straight cuts.

Easy to set up and lightweight (45 lbs).

CONS:

There are no drawbacks that I see with this equipment.

6. SKILSAW SPT99-11 10” Heavy Duty Worm Drive Table Saw

SKILSAW SPT99-11 10” Heavy Duty Worm Drive Table Saw with Stand

The SKILSAW SPT99-11 has the most powerful motor on this list (5 HP), which allows cutting through pretty much anything without any problem.

This is a worm drive power saw with a 15 amps induction motor for superior torque and performance.

It includes an anti-snag lower guard, smooth rack & pinion fence, and telescoping fence rails.

It has a large cast-iron table (20 X 22 inches) for increased stability during the cut process.

The cutting capacity of this particular equipment is at least 25 inches, thanks to its adjustable blade guard with anti-kickback pawls.

It also includes an easy-to-read bevel scale that goes up to forty-five degrees.

The rip fence extension has an integrated ruler, while the adjustable miter gauge allows angular cutting at angles between twenty-nine and fifty-five degrees without needing to purchase additional accessories or inserts.

It includes a 10-inch carbide-tipped blade (made in China) with fifteen teeth for faster cuts; however.

The gearbox needs oil before operating it for the first time.

PROS:

It has a heavy-duty cast-iron table (made in the USA)

The carbide-tipped blade makes your cuts faster and much easier.

CONS:

There are no drawbacks that I see with this equipment.

7. DeWalt DW744XRS 10″ Job Site Table Saw with Rolling Stand

The DeWalt DW744XRS is a 10-inch table saw with a sleek design and many useful features.

It comes with an easy-release riving knife that makes the cut more precise while decreasing the chances of having kickback on your project.

It also includes a 40-tooth carbide blade for faster cuts, an easy-to-read miter gauge with a perfect 90 degrees, and it’s able to make bevel cuts at 45 degrees.

It has a large cast-iron table surface for increased stability during the cut process.

While the cutting capacity goes up to 25 inches thanks to its adjustable blade guard with anti-kickback pawls.

This product includes a rolling stand, which allows the user portability between locations.

Also, it has an advanced fence design and an improved rear outfeed support extension (increased from 18 inches to 25 inches).

It’s compatible with many accessories from different producers.

There is a 1-year commercial warranty included when you purchase this product from DeWalt

PROS:

It has a heavy-duty cast-iron table

The cutting capacity goes up to 25 Inches

It comes with a rolling stand which provides easy portability between job sites.

CONS:

There are no drawbacks that I see with this equipment.

Buyer Guide:

When it comes to choosing the best table saws under $300.

There are some features that you need to consider before making a purchase. These are:

1. Two types of motors

You should know that table saws can be split into two different categories: induction motors and direct-current (DC) motors.

The first ones are the standard for most products, while the second type is becoming more popular in power tools nowadays because it has better performance overall.

2. Blade size

The most common blade sizes are 10 inches or 12 inches; however, 7 to 8-inch blades are also present on some saws if you need them to perform smaller cuts.

Usually, 10-inch blades are the best choice because they are powerful enough for almost any task.

Yet they leave enough space for small pieces of material to pass through easily without causing problems with your project.

3. Safety features

The best table saw for under $300 has to have the best safety features on the market, so you don’t need to worry about injuring yourself while working.

The basic equipment offers anti-kickback pawls and a splitter (double or triple); however, some manufacturers include more advanced components such as riving knives.

4. Fence design

The fence should be made of aluminum and steel because they are sturdy enough to provide stability during cuts.

Having at least one T-slot will allow you to add an aftermarket fence that doesn’t require any additional drilling into the product itself.

Most fences slide smoothly thanks to their rack & pinion design and ball bearings; this way, your cuts can be precisely accurate without needing too much effort from your part.

5. Dust collection

A good table saw should have an integrated dust collection port that allows you to connect a vacuum cleaner directly to the product.

So you can keep your work area tidy and clean without needing to invest in additional accessories for this function.

Having one of these ports greatly helps with the overall performance because it’s able to lift up larger pieces of material.

Which reduces their chances of getting stuck on the blade or blocking the cut process entirely.

6. Availability of aftermarket components

You can find many aftermarket components for table saws, such as blades, fence systems, miter gauges, and much more.

However, not all products are compatible with different accessories from different brands.

You should look at the list of compatible accessories on the product’s webpage.

Because it will give you an idea of what you can do with it, as well as how easy it is to upgrade some functions.

7. Warranty

Warranties are important for power tools because they determine how long your investment is going to last before needing repairs or some other type of intervention from the company itself.

Some products come with a 1-year warranty while others have 2 years of coverage included.

Make sure to read user reviews online before deciding which one is best for you since some brands are more reliable than others in this respect.

8. Noise level

Some table saws under $300 produce high amounts of noise during their operation.

So if you’re not used to this kind of power tool, you should consider buying one that’s less noisy overall.

Noise level is usually measured in decibels (dB), so checking this number before making a purchase can be helpful for some buyers.

Faqs:

Q- What is the best budget table saw?

A- A table saw specifically designed for the use of cutting boards, sheet materials, and other tasks at a lower cost.

It is not as powerful as a cabinet table saw but has features that make it suitable for occasional woodworking projects.

Q- Is a portable table saw good enough for my needs?

A- Portable table saws are usually lighter and smaller than their stationary counterparts which makes them easy to move from one place to another depending on the job requirements.

They can be used for light work such as carpentry, remodeling projects or even making simple furniture pieces.

Q- What are the different types of table saws?

A- A table saw can either be a radial arm or sliding type.

The arms of both these types of table saws can be folded or retracted to reduce storage space and increase mobility.

Sliding table saws also have an additional feature integrated for the more efficient operation which is the miter gauge slot.

Q- What are some general safety rules for using a table saw?

A- There are some basic rules that need to be followed when using a table saw like wearing protective glasses at all times.

Make sure it’s properly plugged in before operating it on your project, inserting the blade first on one side right below the fence.

First and close the fence completely before switching it on then repeat the process on the other side.

Make sure your hands are always away from where the blade will be making contact, and finally don’t forget to unplug it if you need to do some cleaning or maintenance.

Conclusion:

All in all, a good table saw under $300 should have the right capacity for your projects and all the safety features you need to protect yourself during your work sessions.

The best products on this list are able to offer great value for money because they have additional functions that aren’t usually found on other products within this price range.

Overall, they are affordable and easy to use, so make sure to check them out before deciding.

Which one is going to be your next power tool!

Filed Under: Table Saws Tagged With: Best Budget Table Saws Under $300

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

  • Terms and Conditions
  • Disclaimer
  • Privacy Policy


  • COPYRIGHT © 2021 · THESAWTOOLS.COM, ALL RIGHTS RESERVED.