Miter saws have been around since ancient times.
They were hand-powered tools mainly used by woodworkers and carpenters.
But thanks to technology they’ve evolved into one of the best saws for wood that you can buy today.
When you cut a piece of wood, it’s important to keep the angle of the blade relative to the surface being cut at 90 degrees.
If the angle is larger or less than ninety degrees, then you risk splitting or denting your material.
You can’t just eyeball this measurement though because it changes depending on the width of your cut and your perspective of things.
Miter saws have their blade angled so they’ll automatically cut whatever material at the right dimensions every time!
People who are looking to use miter saws will quickly notice there are several different types of blades out there.
There are ten-inch blades, twelve-inch blades, compound blades the list goes on.
In this article, we’ll walk you through three of the most common blades and discuss their pros and cons.
Ten (10”) Inch Blades Miter Saw
The first kind of blade is a 10-inch blade. These are great for people who need precision work but don’t plan on cutting much material at all.
These types of blades aren’t going to be able to stand up against harder materials because they can only cut up to about 2 inches wide with each pass.
On top of that, they’re not as durable as larger diameters so they won’t last as long either.
- Faster Spin Speeds
Another thing is that 10-inch blades spin faster than their larger counterparts, about 3000 RPM.
The speed at which they spin makes them great for precision cuts because they leave cleaner edges.
10 Inches are also very portable, so they don’t take up much space in your workshop and are easy to transport from one job site to another too!
- Precision and Control
If you’re someone who is looking to use a miters saw for precision work, then this type of blade will be perfect.
But if you need to do bulkier tasks like cutting several pieces at once or larger materials, then you might want to consider something else instead.
The last benefit of a 10-inch blade is the fact that it’s very portable. You can easily take them from one job site to another and they don’t weigh much either.
10 Inch Miter Saw Blade Advantages Very precise cuts
Lightweight, easy to transport
Cuts cleanly at high speeds Disadvantages Only good for small jobs
Twelve (12”) Inch Blades Miter Saw
Twelve-inch blades are generally used by those working in construction or carpentry.
You can use these blades for small crosscuts and medium-sized rip cuts.
They’re great for people who need to get accurate cuts but also need to cut through thicker pieces of material on occasion.
This type of blade is more durable than the smaller diameter blades and can be used with both hardwood and softwood materials.
Next up we have twelve-inch blades.
As the name implies, they’re larger than the ten-inch blades and are able to tackle larger pieces of material because of their diameter.
These blades can easily take on wood that’s up to 4 inches wide with each pass so it should be more than enough for most jobs out there.
- Powerful Motor
With that said, 12-inch blades also run faster than 10-inch ones too.
They have a whopping 3350 RPM spin speed which makes them ideal for cutting through harder materials.
These larger blades also tend to be more expensive than the smaller ones but if you’re looking for something that can work on bulkier materials.
Then this is an excellent choice!
The size of your blade is going to determine how long it lasts too.
12-inch blades will typically last a lot longer than 10-inch blades and they also have specialty blades available for specific materials like metal and fiber cement siding.
12 Inches aren’t as portable though so you’ll need to keep that in mind when deciding which one is right for you.
If portability is important, then we suggest going with the ten-inch ones instead.
- Cutting Capacity
A 12-inch blade is ideal for people who need to cut larger pieces of material and you won’t run into as many issues as you would with a 10-inch blade because it’s got a bigger diameter.
The only downside is they’re less portable than smaller blades so if portability is important, then we suggest going with the ten-inch ones instead.
- Efficient Cutting
12-inch blades won’t leave as clean of edges as their smaller counterparts because they’re not spinning as fast but that’s to be expected.
With that said, if you need something durable and powerful at the same time, then this is an excellent choice! And don’t worry, there are specialty blades available for almost anything.
So you won’t have to worry about getting a special blade just for hard materials.
Compound blades are a bit larger in diameter, which means they can take on slightly longer cuts easier.
However, you won’t be able to achieve the same level of accuracy you would with a 12-inch blade because it’s going to have a deeper cutting angle.
If you’re looking for one blade that will handle anything though, this is it!
In order to choose the right miter saw for your needs, you’ll want to keep all these factors in mind.
If you’re looking for accuracy, a 12-inch blade is the way to go. If you need to cut through thick pieces of material as well as precision cuts.
Then a compound blade is right up your alley.
Remember though, not all miter saws come with every type of blade so it’s important to know what accessories are included!
Miter saws are an incredible tool for woodworkers and carpenters.
Thanks to advances in technology, they’ve become even better than ever before.
Whether you only want precision cuts or you need different blades for cutting through thick material easily, there’s a miter saw out there for you!
Miter Saw Classification: Inside Or Outside Cut
One great thing about using a miter saw is that there are all sorts of different cuts you can make.
You can use it to make bevel, or compound, or sliding cuts as well as all sorts of other angles and shapes.
The primary difference between these cuts is whether they start from the inside or outside part of the material and we’ll take a look at how each cut works and what it’s used for below.
In order to achieve an inside cut, you need to have something with a smaller circumference than your blade so that your blade doesn’t go too far.
In other words, your material needs to have a smaller diameter than the blade itself.
In order to achieve an outside cat, you need something that’s larger in circumference than your blade so that it doesn’t go too deep into the material.
In other words, your material should have a larger diameter than the blade itself!
Miter Saw Classification: Eastern Or Western Style Miter Saws
Most of us are familiar with miter saws but there are two different styles available- eastern and western.
Knowing which style is best for you will be important when deciding on what type of miter saw suits your needs.
Let’s take a look at each type now!
Western Style Miter Saw – These are the most common type of miter saws and as a result, they’re also the most affordable.
In many cases, you can find them for around $100 or less! Compared to other types of miter saws.
The eases of use is tremendous because all you have to do is slide your material left or right and it’ll automatically cut at a perfect 90-degree angle every time.
Eastern Style Miter Saw – When compared with western style miter saws, these are slightly more complicated to use but they make up for it by offering superior capabilities.
They allow you to make compound cuts which means not only will it cut through your material horizontally but vertically as well thanks to the fixed pivot design.
In other words, if you need an angled cut, you won’t need to make separate cuts. Instead, simply adjust the design and cut vertically as well!
Which Miter Saw iS Better 10 Inch Or 12 Inch?
Miter saws are a great tool to have in your workshop and the motor power of the one you choose will determine its capabilities.
As a result, you’ll need to decide whether you want a 10-inch miter saw or a 12-inch model.
In small homes or workshops where space is limited, 10 inch miter saws are ideal because they’re easier to transport.
In fact, many models can be easily disassembled into two pieces which makes it even easier.
The drawback however is that these types of miter saws aren’t quite as powerful so there’s a limit on what you can cut through with them.
12 inch miter saws on the other hand offer more cutting power and as a result, many of them can handle different types of materials.
The only drawback is they tend to be bigger and heavier which means it’s more challenging finding somewhere to store them!
As you can see, the difference between a miter saw and a compound miter saw is significant and it’s important to know what type of cuts you plan on making before choosing which one to purchase.
Once you decide though, be sure to choose a reputable brand such as Hitachi or Makita for example if you’re looking for the best!
Thank you very much for reading this article.
I hope that it has provided some insights into this tool.
If so, please share with your friends, family members,s and anyone who might find this information useful.
If they like it, feel free to leave a comment below and let me know how useful it was if possible! Cheers and all the best.